HANNAI ENGINEERING NOTES

Engineering Notes

Selected machine, quotation, acceptance and production knowledge for buyers turning a cup requirement into a workable project.

Curated paths by your current project decision

01Machine SelectionMatch cup range, output, paper and utilities before comparing models.Read selection guide Compare core machines

02Cost & QuotationPrepare the details that affect configuration scope and a machinery quotation.Read quotation guide View HN-S120

03Production PlanningConnect printing, blank cutting, cup forming, collection and packing.Read planning guide Explore production line

04Cup ApplicationsUse the final coffee, takeaway or food-service cup to guide machine selection.Read cup application guide View HN-M100

05Installation & MaintenancePrepare factory utilities, acceptance checks and practical startup discussion.Read acceptance checklist Ask about your project

LATEST NOTES

Recent Technical and Buyer Guidance

All published notes remain available below; the featured paths above are the recommended starting points.

Groups of finished printed paper cups available for separate destructive test samples

Engineering Note

Paper Cup Destructive Test Gage Study

Design a paper cup destructive test gage study using homogeneous sample groups and the correct crossed or nested structure before judging test variation.

Read note

White paper cup packing machine with a long product infeed and enclosed wrapping section

Engineering Note

Paper Cup Carton Compression Mapping

Plan a paper cup carton compression test with controlled pack construction, mapped cup positions and agreed post-test checks so internal damage is not missed.

Read note

Finished printed paper cups arranged upright for dimensional and use-condition comparison

Engineering Note

Paper Cup Hot-Fill Deformation Trial

Plan a paper cup hot-fill deformation comparison with an approved liquid, controlled fill history and time-based measurements before judging forming quality.

Read note

Printed paper cups standing upright with clearly visible rim profiles

Engineering Note

Paper Cup Lid Force Study Planning

Plan a paper cup lid force study with matched cup-and-lid identities, controlled alignment and force-displacement records before setting acceptance limits.

Read note

Several nested stacks of printed paper cups with different stack heights

Engineering Note

Paper Cup Nesting Pitch Measurement

Measure paper cup nesting pitch from cumulative stack-height data, controlled cup order and seating method instead of dividing one unstable stack reading.

Read note

Paper cup machine forming station with circular tooling and adjacent mechanisms

Engineering Note

Paper Cup Bottom Recess Depth Mapping

Map paper cup bottom recess depth around the support ring with a controlled datum and orientation, separating local base damage from a forming-depth pattern.

Read note

Engineering Note

Paper Cup Sidewall Taper Measurement

Measure paper cup sidewall taper with defined height references, a suitable fixture and profile data so ovality is not mistaken for cone angle.

Read note

Printed paper cups standing upright beside nested stacks with visible curled rims

Engineering Note

Paper Cup Rim Plane Inspection Guide

Inspect paper cup rim plane consistency with a defined support, cup orientation and non-distorting method before changing curl tooling or rejecting production.

Read note

Paper cup wrapping equipment with an extended product infeed and white machine enclosure

Engineering Note

Paper Cup Pack Vibration Trial Planning

Plan a paper cup pack vibration trial around the shipment configuration, defined acceptance criteria and post-test cup checks, with clear limits on any claim.

Read note